Purolator's Model 66 Liquid Cartridge housing gives the versatility of choosing cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P66 accommodates three elements in either 20, 30, or 40 inch lengths.
• Carbon or stainless steel construction
• Plated quick swing closure with eye nuts
• Buna lid seal
• 316 SS cup & spring assemblies
• 300 PSI pressure rating
• Differential, drain, and vent ports
• 316 SS center guide post
• Epoxy paint - inside and out - on carbon steel
OPTIONS
• Duplexing for continual flow during maintenance
• Higher pressure rating
• ASME code U or UM
• Adjustable support legs
• Specify element type
• DOE (Double Open Ended) cartridges
• 222 style O-ring with closed top cap
• 226 style with closed top cap
NOTE: Filter is not included in the housing,
but the type of element must be specified at
time of housing order.
3 types of filter housings exist primarily in this category; P44, P66 & P88. See below for their descriptions and applicability.
Mouse over image for
larger view.
Product Guide
Markets Served
© Copyright 2008 - PDDA Filtration, Inc. - All Rights Reserved
All brand and product names are the trademarks of their
respective owners.
• Search This Site •
• Tools •
• Site Map •
• Manufacturers •
Purolator
Facet
Cuno
3-M
Parker
Millipore
Peco
Commercial
Sartorius
Velcon
Ametek
Filterite
US Filter
USF Filtration
Pall
The Filter Factory
Nowata, Inc.
Site Optimized for IE 6+
Purolator's Model 44 Liquid Cartridge housing gives the versatility of choosing cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P44 accommodates one element in either 10, 20, 30, or 40 inch lengths.
Mouse over image for
larger view.
Filter housings product of:
• Chemical Process
• Food & Beverage
• Oil & Gas
• Industrial
• Biofuel Production
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
This diagram applies to
all 3 different filter housing types.
• Carbon or stainless steel construction
• Plated quick swing closure with eye nuts
• Buna lid seal
• 316 SS cup & spring assemblies
• 150 PSI pressure rating
• Differential, drain, and vent ports
• 316 SS center guide post
• Epoxy paint - inside and out - on carbon steel
• Adjustable support legs
OPTIONS
• Duplexing for continual flow during maintenance
• Higher pressure rating
• ASME code U or UM
• Adjustable support legs
• Specify element type
• DOE (Double Open Ended) cartridges
• 222 style O-ring with closed top cap
• 226 style with closed top cap
NOTE: Filter is not included in the housing,
but the type of element must be specified at
time of housing order.
• Chemical Process
• Food & Beverage
• Oil & Gas
• Industrial
• Biofuel Production
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
Mouse over image for
larger view.
Purolator's Model 88 Liquid Cartridge housing gives the versatility of choosing cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P88 accommodates six elements in either 20, 30, or 40 inch lengths.
• Carbon or stainless steel construction
• Plated quick swing closure with eye nuts
• Buna lid seal
• 316 SS cup & spring assemblies
• 150 PSI pressure rating
• Differential, drain, and vent ports
• 316 SS center guide post
• Epoxy paint - inside and out - on carbon steel
• Adjustable support legs
OPTIONS
• Duplexing for continual flow during maintenance
• Higher pressure rating
• ASME code U or UM
• Adjustable support legs
• Specify element type
• DOE (Double Open Ended) cartridges
• 222 style O-ring with closed top cap
• 226 style with closed top cap
NOTE: Filter is not included in the housing,
but the type of element must be specified at
time of housing order.
• Chemical Process
• Food & Beverage
• Oil & Gas
• Industrial
• Biofuel Production
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants