4 lines of filters exist in this category; ACCU-CLEAR™, AQUA-CLEAR CV™,
OMNI-CLEAR™ and POLY-CLEAR™. See below for their descriptions and applicability.
Mouse over image for
larger view.
Product Guide
Markets Served
© Copyright 2008 - PDDA Filtration, Inc. - All Rights Reserved
All brand and product names are the trademarks of their
respective owners.
• Search This Site •
• Tools •
• Site Map •
• Manufacturers •
Purolator
Facet
Cuno
3-M
Parker
Millipore
Peco
Commercial
Sartorius
Velcon
Ametek
Filterite
US Filter
USF Filtration
Pall
The Filter Factory
Nowata, Inc.
Site Optimized for IE 6+
The ACCU-CLEAR™ pleated cartridge line has been developed to meet the process needs and throughput requirements of the pharmaceutical, food and beverage, electronics, chemical, and other critical industries. This high performance range of filter
cartridges are constructed of pleated micro-fiberglass filter medium laminated to a non-woven polyester support. The uniform pore structure of the filter medium provides consistent absolute removal of particles from 0.6 to 40 µm. The high surface area of ACCU-CLEAR™ filters ensure long life cycles and low initial pressure drops.
Cartridge hardware components are constructed of high purity polypropylene materials that can be safely used in critical process applications. ACCU-CLEAR™ cartridges are constructed and assembled in a clean room environment to minimize the possibility of contamination. ACCU-CLEAR™ Series cartridges are available in a wide range of configurations to fit most commercially available filter housings.
• High surface area filter cartridges constructed of pleated micro-fiberglass media provide absolute particle retention and long on-stream life cycles.
• Absolute removal ratings available from 0.6 to 40 µm.
• The filter medium with controlled pore sizes and stringent quality control standards guarantee a uniform matrix for effective, consistent filtration performance.
• Materials of construction provide wide chemical compatibility in most liquid and gas applications.
• All cartridges are constructed and assembled in a clean room environment to ensure minimal particle contamination.
• High strength, polypropylene components and advanced thermal bonding techniques ensure cartridge integrity under severe operating conditions.
• No adhesives, binders, lubricants, or coatings are used in the manufacturing process to ensure the lowest levels of leachables or extractables.
• Pharmaceutical grade offers 100% lot traceability.
• Chemical Processing
• Food and Beverage Processing
• Membrane Pre-filtration
• Paints, Coatings, and Inks
• Solvents
• Pharmaceuticals
• Wine Clarification
• Sterile Air Filtration
Filter media product of:
Mouse over image for
larger view.
AQUA-CLEAR CV™ pleated cartridges are manufactured with advanced hydrophilic polyethersulfone membranes and all polypropylene components. The PES membrane provides sharp particle cut-offs and is compatible with a broad range of chemicals and pH extremes. AQUA-CLEAR CV™ cartridges provide reliable particle retention and enhanced throughput for superior performance in critical applications.
AQUA-CLEAR CV™ Series filter cartridges are constructed and assembled in a clean room environment. AQUA-CLEAR CV™ filter cartridges are biologically safe and meet the requirements of USP Class VI tests for plastics. This range of filter cartridges is available in a wide range of configurations to fit most commercially available filter housings.
• High surface area filter cartridges, constructed of pleated polyethersulfone membranes, provide absolute particle retention and long on-stream life cycles.
• Absolute removal ratings available from 0.05 to 0.45 µm.
• 100% polypropylene materials of construction provide wide chemical compatibility in most applications with no leachables or extractables.
• All cartridges are constructed and assembled in a clean room environment to ensure minimal particle contamination.
• Cartridges are sealed using an advanced thermal bonding process and flushed with ultrapure water to ensure the lowest level of extractables.
• Pre and Post Filter for DI Water
• Point-of-Use Filter for DI Water
• Filtration of Aqueous Chemical Solutions
• Filtration of Aqueous-Based Inks and Dies
