ACCU-CLEAR™ Reserve Series Glass Microfiber Pleated Filters

7 lines of filters exist in this category; ACCU-CLEAR™, AQUA-CLEAR CV™,
OMNI-CLEAR™, POLY-CLEAR™, ACCU-CLEAR™Reserve, OMNI-CLEAR™Reserve, and POLY-CLEAR™Reserve.
See below for their descriptions and
applicability.

accu_clear_res
pleated_cartridge

Mouse over image for
larger view.

PDDA Filtration, Inc.

Home

Product Guide

Markets Served

Glossary of Terms

Quote Request

Cross Reference

Contact Us

Get Adobe Reader

 

 

Get Internet Explorer

© Copyright 2008 - PDDA Filtration, Inc. - All Rights Reserved
All brand and product names are the trademarks of their
respective owners.

Search This Site

calc

Tools

globe1

Site Map

Manufacturers

Purolator
Facet
Cuno
3-M
Parker
Millipore
Peco
Commercial
Sartorius
Velcon
Ametek
Filterite
US Filter
USF Filtration
Pall
The Filter Factory
Nowata, Inc.

 

Site Optimized for IE 6+

PDDA Filtration, Inc.
description

ACCU-CLEAR™ Reserve Series pleated cartridge line has been developed to meet the process needs and throughput requirements of the wine industry. This high performance range of filter cartridges are constructed of pleated glass microfiber filter medium laminated to a non-woven polyester support. The uniform pore structure of the filter medium provides consistent removal of particles from 1.0 to 40 µm. The high surface area of the ACCU-CLEAR™ filters ensure long life cycles and low initial pressure drops.

Cartridge hardware components are constructed of high purity polypropylene materials that can be safely used in critical process applications. ACCU-CLEAR™ cartridges are constructed and assembled in a clean room environment to minimize the possibility of contamination. ACCU-CLEAR™ Reserve Series cartridges are available in a wide range of configurations to fit most commercially available filter housings.

attributes
applications

Back to Top

Filter media product of:

puro_logo

Mouse over image for
larger view.

description

OMNI-CLEAR™ Reserve PES Pleated Cartridges are manufactured with advanced hydrophilic polyethersulfone membranes and all polypropylene components.
OMNI-CLEAR™ Reserve PES Pleated Cartridges provide reliable particle retention to effectively achieve microbiological stability without the use of heat or chemicals. OMNI-CLEAR™ 0.2 µm and 0.45 µm filters provide significant microorganism reduction. Purolator’s beverage grade filters provide greater than a 7 log reduction value of Brevundimonas diminuta (0.2 µm) and Serratia marcescens (0.45 µm) following the test guidelines stated in ASTM F838-05. OMNI-CLEAR™ Reserve PES Pleated Cartridges are constructed and assembled in a Class 10,000 Clean Room and are 100% traceable. The cartridges are steam sterilizable and can withstand repeated autoclaving cycles, following standard USP guidelines. OMNI-CLEAR™ filter cartridges are biologically safe and all materials of construction are FDA listed for food and beverage contact per CFR Title 21. This range of filter cartridges is available in a wide range of configurations to fit most commercially available filter housings..

applications

Continued

pleated_lg

High surface area filter cartridges, constructed of pleated
glass microfiber medium, provide efficient particle retention
and long on-stream life cycles.

Removal ratings available from 0.6 to 40.0 µm.
No adhesives, binders, lubricants, or coatings are used in
the manufacturing process to ensure the lowest levels of
leachables and extractables.
All cartridges are constructed and assembled in a clean
room environment to ensure minimal particle contamination.

Materials of construction provide wide chemical compatibility
in most liquid applications.

Each cartridge is stamped with the product part number
and lot number for quick identification and 100% traceability.

Fine Wine Filtration

omni_clear_res
attributes

High surface area filter cartridges, constructed of pleated
asymmetric polyethersulfone membranes, provide absolute
particle retention and long on-stream life cycles.

Absolute removal ratings available from 0.2 to 1.2 µm.
100% polypropylene materials of construction provide wide
chemical compatibility in most applications with no leachables or extractables.

All cartridges are constructed and assembled in a Class
10,000 Clean Room to ensure minimal particle contamination.

Cartridges are sealed using an advanced thermal bonding
process and flushed with ultrapure water to ensure the lowest level of extractables.

Each cartridge is stamped with the product part number
and lot number for quick identification and 100% traceability

 

omniclearlg

OMNI-CLEAR™ Reserve Series PES Pleated Filters

Fine Wine Filtration

poly_clear_res

POLY-CLEAR™ Reserve Series Polypropylene Pleated Filters

description

POLY-CLEAR™ Reserve Series Polypropylene Pleated Filter cartridges deliver high efficiency and consistent filtration of fluids in a wide range of winery applications.
POLY-CLEAR™ filter cartridges are constructed of pleated, melt blown filter medium that provides particle removal from 0.2 to 50 µm. The high surface area POLY-CLEAR filters
ensure long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in beverage applications. POLY-CLEAR™ cartridges are manufactured and assembled in a Class 10,000 Clean Room to minimize the possibility of contamination. POLY-CLEAR™ Series cartridges are available in a wide range of configurations to fit most commercially available filter housings.

attributes

Filter cartridges are constructed of microfiber melt blown
media to provide high area, surfactant-free, and non-fiber releasing filtration.

Multi-layered filter media is optimized for high efficiency
particle removal and high contaminant holding capacity
resulting in longer on-stream life cycles.

Durable, thermal bonded construction. No adhesives,
binders, lubricants, or anti-static agents are used in the manufacturing process.

100% polypropylene materials of construction provide wide
chemical compatibility with acids, bases, alcohols, and
most organic solvents. The high purity construction assures
quick rinse up in critical applications.

Each cartridge is stamped with the product part number
and lot number for quick identification and 100% traceability.

All materials of construction are FDA-listed for food and
beverage contact according to CFR Title 21 and comply with USP Class VI test for plastics.

applications

Fine Wine Filtration

pleated_lg

Mouse over image for
larger view.

pdf_icon

ACCU-CLEAR™ Reserve Tech Sheet

OMNI-CLEAR™ Reserve Tech Sheet

pdf_icon

POLY-CLEAR™ Reserve Tech Sheet

pdf_icon