• Up to 100 GPM
• Chambers constructed out of 304 stainless steel
• Piping constructed out of 304 stainless steel
• Each bag filter chamber holds one (1) 7" x 30" double stitched filter bag
• Maximum operating pressure is 125 psi
• Stainless steel inlet and outlet manifolds
• Bag filter chamber connect in parallel
• Units are fitted with bleed valves and pressure gauges
• System can stand alone for sediment removal or be used in combination with filter equipment
• Footprint: 48" long x 36" wide x 66" high
• Dry weight: 500 pounds
• Manifold connections are 2" 150lb flanges
• Single bag filter
• Bag filter for high solids holding capacity
• Replaceable bag filters from 100 to 1 micron nominal rating
• No moving parts
• Skid mounted
Our bag filters are designed for various applications - the units range from low pressure to higher volumes systems that can accommodate small applications to more complex discharge requirements. We also offer water quality monitoring solutions with our portable water quality meters and filtration systems.
PDDA Filtration custom manufactures Skid Mounted Liquid Filtration Systems to your specifications or we can manufacture a system for you based on your liquid filtration needs. Listed below are some of the systems we have manufactured.
Product Guide
Markets Served
© Copyright 2008 - PDDA Filtration, Inc. - All Rights Reserved
All brand and product names are the trademarks of their
respective owners.
• Search This Site •
• Tools •
• Site Map •
• Manufacturers •
Purolator
Facet
Cuno
3-M
Parker
Millipore
Peco
Commercial
Sartorius
Velcon
Ametek
Filterite
US Filter
USF Filtration
Pall
The Filter Factory
Nowata, Inc.
Site Optimized for IE 6+
Mouse over image for
larger view.
Mouse over image for
larger view.
Mouse over image for
larger view.
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
• Up to 200 GPM
• Chambers constructed out of 304 stainless steel
• Piping constructed out of 304 stainless steel
• Each bag filter chamber holds one (1) 7" x 30" double stitched filter bag
• Maximum operating pressure is 125 psi
• Stainless steel inlet and outlet manifolds
• Bag filter chamber connect in parallel
• Units are fitted with bleed valves and pressure gauges
• System can stand alone for sediment removal or be used in combination with filter equipment
• Footprint: 48" long x 36" wide x 66" high
• Dry weight: 800 pounds
• Manifold connections are 2" 150lb flanges
• Double bag filter
• Bag filter for high solids holding capacity
• Replaceable bag filters from 100 to 1 micron nominal rating
• Isolation valving per chamber
• No moving parts
• Skid mounted
Single Bag Filter
Double Bag Filter
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
Quadruple Bag Filter
• Up to 400 GPM
• Chambers constructed out of 304 stainless steel
• Piping constructed out of 304 stainless steel
• Each bag filter chamber holds one (1) 7" x 30" double stitched filter bag
• Maximum operating pressure is 125 psi
• Stainless steel inlet and outlet manifolds
• Bag filter chamber connect in parallel
• Units are fitted with bleed valves and pressure gauges
• System can stand alone for sediment removal or be used in combination with filter equipment
• Footprint: 62" long x 36" wide x 61" high
• Dry weight: 1,150 pounds
• Manifold connections are 6" 150lb flanges
• Quadruple bag filter
• Bag filter for high solids holding capacity
• Replaceable bag filters from 100 to 1 micron nominal rating
• Isolation valving per chamber
• No moving parts
• Skid mounted
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
Multiple Bag Filter
Constructed of Stainless Steel, this filter is able to remove large sediments and particulates from fluids by using multiple bag filters capable of handling flows up to 1000 GPM. These replaceable bag filters are available for high solids holding capacity from 100 to 1 micron nominal rating. This filter system is suitable for numerous industrial filter applications and will allow you to meet or exceed Phase II discharge requirements. This skid-mounted unit is able to operate at up to 150 PSI and the vessels are ASME coded. This filter system can be used either as a stand-alone unit in sediment filtration or manifolded with other equipment.
Mouse over image for
larger view.
• Up to 1000 GPM
• Chambers constructed of 304 Stainless Steel
• Maximum operating pressure: 150psi at 200 degrees Fahrenheit
• Recommended working pressure is 75 psi
• 6” Stainless Steel inlet and outlet
• Vessels are ASME coded
• 30” bag filter chamber holds eight 7” x 30” filter bags
• Units are fitted with bleed valves and pressure gauges
• System can stand alone for sediment removal or be used in combination with other filter equipment
• Footprint: 48" long x 48" wide x 63" high
• Skid weight-dry: 2,000 lbs
• Inlet and outlet connections are 6" 150lb flanges
• Replaceable bag filters available for high solids holding capacity from 100 to 1 micron nominal rating
• No moving parts
• Skid mounted
• Paints, Inks, Dyes, and Coatings
• Metal Finish / Plating Solutions
• Animal & Vegetable Oils
• RO & Process Water
• Dilute Acids and Alkalis
• Municipal & Waste Water Systems
• Pre-Polymer Filtration
• Pulp and Paper
• Cutting Fluids & Coolants
